| September 2011 |  | | THE RIGHT SOLVENT FOR THE RIGHT JOB! | | | | | Plastic Parts Cleaner: vinyl, plastic, fibreglass, SMC, rubber
Final Wipe Solvent: primed or painted metal surfaces, fabrics
Wax and Grease Remover: bare metal, stainless steel, galvanized steel, aluminium, thoroughly cured 2K paint, stubborn contaminants
General Purpose Adhesive Cleaner: tools, equipment, adhesives, glass, shop cleaner
Acetone: fibreglass, SMC, gel coat, waterborne paint gun, contact cements, epoxies.
| | | |  | | | | | April 2006 | | | Use the right solvent ! | | | | | Surface preparation is a key step to insure maximum adhesion. Make sure to use the proper solvent as an aggressive solvent may penetrate the substrate and weaken adhesion. Pro Form offers a variety of cleaners and solvents. | | | | | | | |
|
 |
 |
 |
|
Our labels usually give you all info needed
to get the best performance out of our products. You will also find in this
edition, some pertinent tips and comments from Jim our specialist. Remember that
you may reach our technical departement for complementary advice any time during office hours. |
 |
|
